(r9) SrWiemanProjStatus < Sandbox

Tags: view all tags

---++ Current status of Project Work
---+++ WIRC-POL

Optomechanical Design Support for Polarimetry upgrade

%TABLE{ sort="on" tableborder="0" cellpadding="4" cellspacing="3" cellborder="0" headerbg="#D5CCB1" headercolor="#666666" databg="#FAF0D4, #F3DFA8" headerrows="2" footerrows="1" }% 
| Task | Status |
| <p><font face="Calibri" size="3">Two-position focal plane mask for: </font></p> <p><font face="Calibri" size="3">1. full-FOV (current configuration) </font></p> <p>2. reduced FOV (reduce background behind spectro/polarimetric traces)</p> | <p><font size="3"><font face="Calibri">Bi-stable Mechanism preliminary design complete in the SW Vault under: <font color="Green">WIRC-&gt;WIRC-POL-&gt;WIRC-POL Preliminary Design-&gt;06_30_16FieldStop mechanism.SLDASM</font></font></font></p> Mechanism actuator, either push pull solenoid or stepper motor (precise actuation unnecessary due to bi-stable design) is still required. Mechanism image: [[%ATTACHURL%/06_30_16Field_stop_mechanism_transp.JPG ][06_30_16Field_stop_mechanism_transp.JPG ]]|
|Zemax modeling for verifying optomechanical design decisions (e.g.,* [[%ATTACHURL%/WIRC-POL_PG_AOI_7-8-16_weekly_meeting.pdf ][WIRC-POL_PG_AOI_7-8-16_weekly_meeting.pdf ]]: Pol. Grat AOI Zemax )|Current .zmx for WIRC-POL upgrade   [[%ATTACHURL%/4quadrant_WIRCPOL_sequential.zmx ][4quadrant_WIRCPOL_sequential.zmx ]]: originally an interim version until IUCAA model is provided (still awaiting)|
|Chuck H. is  handling mods to filter wheel for GRISM & PG and new H2_RG mounting and related dewar mods. Some related files: <p> Chuck H. WIRC-POL SOW: [[%ATTACHURL%/SOW_Chuck_Henderson_6_17_16.docx][SOW_Chuck_Henderson_6_17_16.docx]]<p>Schedule of WIRC-POL optomechanical upgrades (basis for CH SOW): [[%ATTACHURL%/WIRC-POL_schedule_6_17_16.xlsx ][WIRC-POL_schedule_6_17_16.xlsx ]]|Precision Cryo dewar and Telic optics drawings are partially converted to SW CAD models in the vault under:<font color="Green">WIRC-&gt;WIRC-POL-&gt;WIRC-POL Preliminary Design-&gt;and</font> <font color="Green">WIRC-&gt;WIRC-POL-&gt;WIRC-POL Preliminary Design-&gt;COLD-COL-WIRC-OPTICS.SLDASM</font> \
Precision Cryogenics 2-D hardcopy drawings were scanned into file: [[%ATTACHURL%/PC_WIRC_Drawings.pdf ][PC_WIRC_Drawings.pdf ]] |

---+++ SED Machine

Instrument stability upgrades: Initial work was done to address the problem of shifting of the spaxel locations and spectral trace separation in the IFU images leading to failure of the data reduction pipeline to produce a data cube and extract reliable spectra. The shifting has occurred repeatedly at intervals of about 2 -3 weeks and shows signs of occurring as both a modest gradual shift with time (intervals of weeks) as wells as isolated, larger rapid (overnight) shifts. One source of this shifting that became evident was rotation of the optics barreled axially housing the SEDM collimator optics and lenslet array. These optics are just upstream of the SEDM prisms and the housing was originally held into a vee-block mounting by tension springs - mounting which allowed it to be easily rotated, and slightly shifted axially, by hand. [[%ATTACHURL%/Example_of_SEDm_spaxel_shift.pdf ][Example_of_SEDm_spaxel_shift.pdf ]] includes a progression of IFU images shown as overlying contour plots to highlight shift of spaxel location with time relative to a reference image. These P60 dome images were obtained over a period of about two weeks between two adjustments of the collimator barrel required to correct the restore its proper orientation. An explanation of the alignment procedure is shown in [[%ATTACHURL%/SEDM_collimator_rotation.pdf ][SEDM_collimator_rotation.pdf ]] 

To prevent this loss of lenslet alignment, the tension springs used to hold the collimator barrel in place were replaced with split clamps. These clamps were intended as somewhat of an interim fix that could be installed with minimal disassembly of the instrument and without interruption of nightly observations. Following installation of the clamps a load cell force sensor was used to apply a 14lbf load (about 2 times the weight of the optics barrel) to the barrel opposite a dial indicator to measure any displacement. Displacement under the applied load was less than 3 microns which is within the observed fluctuation of the indicator readout with no load applied. Notes/pictures describing the installation and tests are in [[%ATTACHURL%/SEDM_collimator_clamp_replacement.pdf ][SEDM_collimator_clamp_replacement.pdf ]].   

Camera optics downstream of the SEDm prisms are mounted in a similar vee-block/tension spring arrangement. Replacement clamps like those installed on the collimator have also been made for these camera optics, but have not been implemented because the procedure required to install them would require further SEDM disassembly and downtime.

---+++ HCST

Design/Specification of optic mounts, mechanisms, optical enclosures

A Solidworks model including the most current optics layout with mounts and mechanisms (a good resource for generating a BOM) is in the SW vault under <font color="Green">HCST-&gt;HCST CAD MODELS-&gt;HCST Preliminary Design-&gt;HCST 20160405A.SLDASM</font>

Work was done to develop a mount for the Boston Micromachines (BMM) Kilo-DM that would be less susceptible to acoustical vibrations to which Kent W. had found them to be susceptible. An initial design was based on direct rigid mounting to the ZIF socket to which the DM package attaches. This design was thought to be an improvement over the stock mount with attachment points only on the DM circuit board - an approach that was deemed susceptible to the transfer of acoustical vibrations excited in the circuit board to the DM. BMM did not explicitly discourage the custom mount design but did indicate that it would void the warranty primarily because it could potentially damage the ZIF socket. Details from the email exchange with BMM are here:[[%ATTACHURL%/BMM_Kilo-DM_exchange.pdf][BMM_Kilo-DM_exchange.pdf]] . It also includes additional details about how the ZIF attaches to the PCB which make the plan of direct-mounting to the ZIF seem less appealing. 

---+++ ZTF Documentation

Assembly of Documents into binder

Alternative for greater file access flexibility

---+++ Other

Zemax model (:[[%ATTACHURL%/BMM_Kilo-DM_exchange.pdf][BMM_Kilo-DM_exchange.pdf]] ), SolidWorks model() and Summary () related to check whether the PTF Shutter might work for WaSP.

Zemax model () , and Summary () related to check if NESSI can be configured for PG 







-- Main.SethWieman - 08 Jul 2016

Attachments

Topic attachments
I	Attachment	History	Action	Size	Date	Who	Comment
JPG	06_30_16Field_stop_mechanism_transp.JPG	r1	manage	1363.0 K	2016-07-11 - 05:59	UnknownUser	Image of the WIRC-POL field stop mechanism
zmx	4quadrant_WIRCPOL_sequential.zmx	r1	manage	126.3 K	2016-07-08 - 23:17	UnknownUser	WIRC-POL .zmx file
pdf	BMM_Kilo-DM_exchange.pdf	r2 r1	manage	1062.9 K	2016-07-11 - 23:17	UnknownUser	Email discussion with BMM about the modified Kilo-DM mount
pdf	Example_of_SEDm_spaxel_shift.pdf	r1	manage	1502.3 K	2016-07-11 - 05:05	UnknownUser	Progression of IFU images showing loss of lenslet alignment
pdf	PC_WIRC_Drawings.pdf	r1	manage	6226.6 K	2016-07-11 - 04:20	UnknownUser
pdf	SEDM_collimator_clamp_replacement.pdf	r1	manage	468.9 K	2016-07-11 - 05:56	UnknownUser	Collimator barrel clamp replacement notes
pdf	SEDM_collimator_rotation.pdf	r1	manage	755.4 K	2016-07-11 - 05:09	UnknownUser	Notes describing an alignment done on the SEDm collimator barrel to restore lenslet alignment
docx	SOW_Chuck_Henderson_6_17_16.docx	r1	manage	15.8 K	2016-07-08 - 23:28	UnknownUser	Chuck Henderson SOW for WIRC-POL upgrade
pdf	WIRC-POL_PG_AOI_7-8-16_weekly_meeting.pdf	r1	manage	514.0 K	2016-07-08 - 23:05	UnknownUser	Pol Grating AOI Zemax
xlsx	WIRC-POL_schedule_6_17_16.xlsx	r1	manage	33.0 K	2016-07-08 - 23:38	UnknownUser	Schedule basis for Chuck H SOW
zmx	WaSP_meniscus_dewar_window_PTF_shutter.zmx	r1	manage	22.7 K	2016-07-12 - 20:09	UnknownUser	Zemax file of P200 with Wynne corrector for evaluating use PTF shutter

Topic revision: r9 - 2016-07-12 - SethWieman

~~Edit~~
~~Attach~~