ZTF Pressure Gauge

Pfieffer Documentation

Configuration Instructions

The following configuration file should be copied to a USB memory stick:

  • SETUP02.CSV: setup file to configure TPG361 on ZTF/P48 network (IP 192.168.1.27)

The configure the pressure gauge controller with this file using the following procedure:

  • Power off controller
  • Insert memory stick
  • Power on controller
  • Select set up
  • Restore set up
  • Select #2
  • Power off controller
  • Unplug memory stick
  • Start recording pressure by holding down the up arrow, or use the tpg.py script.

When Logging Fails

If the pressure isn't being logged, run monitord_test, there is an option there to turn the Pfeiffer on and off. Watch the monitord.log file to see when it connects and starts reading properly again.

-- DavidHale - 03 Nov 2017

Topic attachments
I Attachment History Action Size Date Who Comment
Unknown file formatCSV SETUP02.CSV r1 manage 2.4 K 2017-11-03 - 16:18 DavidHale setup file to configure TPG361 on ZTF/P48 network
Texttxt tpg.py.txt r1 manage 6.1 K 2017-11-03 - 16:27 DavidHale Python script to communicate with Pfeiffer TPG 361 controller
Edit | Attach | Watch | Print version | History: r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions
Topic revision: r2 - 2018-04-12 - DavidHale
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback