PressureGauge < Palomar/ZTF

Tags: view all tags

---+ ZTF Pressure Gauge

---+++ Pfieffer Documentation

   * [[%ATTACHURL%/TPG_361_Communications_Protocol_Manual.pdf][TPG 361 Communications Protocol Manual]]

   * [[%ATTACHURL%/TPG361-TPG362_Ethernet_EN_V5.pdf][TPG 361 Ethernet Interface Notes]]

---+++ Configuration Instructions

The following configuration file should be copied to a USB memory stick:

   * [[%ATTACHURL%/SETUP02.CSV][SETUP02.CSV]]: setup file to configure TPG361 on ZTF/P48 network (IP 192.168.1.27)

The configure the pressure gauge controller with this file using the following procedure:
   * Power off controller
   * Insert memory stick
   * Power on controller
   * Select set up
   * Restore set up
   * Select #2
   * Power off controller
   * Unplug memory stick
   * Start recording pressure by holding down the up arrow, or use the [[%ATTACHURL%/tpg.py.txt][tpg.py]] script.
---+++ When Logging Fails

If the pressure isn't being logged, run monitord_test, there is an option there to turn the Pfeiffer on and off. Watch the monitord.log file to see when it connects and starts reading properly again.

-- Main.DavidHale - 03 Nov 2017

Attachments

Topic attachments
I	Attachment	History	Action	Size	Date	Who	Comment
CSV	SETUP02.CSV	r1	manage	2.4 K	2017-11-03 - 16:18	DavidHale	setup file to configure TPG361 on ZTF/P48 network
txt	tpg.py.txt	r1	manage	6.1 K	2017-11-03 - 16:27	DavidHale	Python script to communicate with Pfeiffer TPG 361 controller

Topic revision: r2 - 2018-04-12 - DavidHale

Edit
Attach