FCS Test Data

* Shortkey FCS Commands from the mosdev> prompt

Command Description
run_mfcs runs the FCS server.
fcs_online puts the FCS controller into online mode. Or use the modify -s mfcs online=1.
fcspos shows the positions in microns of the three actuators.
fcsvolt show the voltages of the three actuators.
f1 xx.xx move actuator 1 to xx.xx microns.
f2 xx.xx move actuator 2 to xx.xx microns.
f3 xx.xx move actuator 3 to xx.xx microns.
stop_mfcs shutdown the FCS server.
Topic revision: r1 - 2009-09-01 - JasonFucik
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback