FCS Test Data
* Shortkey FCS Commands from the mosdev> prompt| Command | Description |
|---|---|
| run_mfcs | runs the FCS server. |
| fcs_online | puts the FCS controller into online mode. Or use the modify -s mfcs online=1. |
| fcspos | shows the positions in microns of the three actuators. |
| fcsvolt | show the voltages of the three actuators. |
| f1 xx.xx | move actuator 1 to xx.xx microns. |
| f2 xx.xx | move actuator 2 to xx.xx microns. |
| f3 xx.xx | move actuator 3 to xx.xx microns. |
| stop_mfcs | shutdown the FCS server. |
This topic: Keck/MOSFIRE > WebHome > FCSTestData
Topic revision: r1 - 2009-09-01 - JasonFucik
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback