Recent Changes in Subaru/PFS Web retrieved at 18:58 (GMT)

2014_08_18_SetB

Set B Tilt/Focus Testing Cabling up Set B Performed frequency sweep on all axes (all looked clean) Loaded mSim database: allMapsAdj 070114adj2.xml...

2014_08_18

9 years ago - r2 ChazMorantz

Set E Focus Tilt Testing Theta Swapped targets in mSim to be Theta targets. Started target run and focus/tilt measurements for Set E theta Finished...

2014_08_15

9 years ago - r3 ChazMorantz

Tilt Testing Camera Set Up Continued with installation of new tilt/focus camera set up. Tilt Focus Testing Started re taking focus and tilt measurements...

2014_08_14

9 years ago - r3 ChazMorantz

Set E Focus Testing Phi Focus Testing Started phi focus testing first thing in the morning. Finished Phi Focus Testing around 11am. Tilt Testing Set Up...

2014_08_13_SetD

9 years ago - r3 ChazMorantz

Set E Focus Testing Theta Focus Re cabled to set E (essentially set D, but with substitutions from set B for non funcitonal postitioners) frequency calibration...

EM122

9 years ago - NEW ChazMorantz

ChazMorantz 13 Aug 2014

EM104

9 years ago - NEW ChazMorantz

ChazMorantz 13 Aug 2014

EM117

9 years ago - NEW ChazMorantz

ChazMorantz 13 Aug 2014

2014_08_13

9 years ago - r2 ChazMorantz

Set C Focus Testing Phi Focus Started with taking video for target #2 Made it to target convergence for #11 when mSim crashed (calculated an angle of 402deg...

2014_08_07

9 years ago - r3 ChazMorantz

Motor Map Generation Had difficulty producing motor maps from run over the previous night. pid5 was not moving. Realized that neighbor (from set D) was...