Recent Changes in Subaru/PFS Web retrieved at 03:59 (GMT)
ran updatemotormaps on last run: 15 09 09 17 18 13 TargetRun New map: 2015 09 03 NSTMaps V06.xml Edited pid 9 map to set first theta bins equal to...
Verified positioners in theta reverse hardstop by hand. Moved phi to intermediate position Ran several images without motion in between to measure joint angle stability...
Checked PID 9 shaft coupler and it is very firmly bonded. So the sticky spot noticed from targets last night is probably not a shaft coupler issue. Checked tension...
Electronics Failure on PID 9 Yesterday PID 9 stopped working after initially working We probed the output signal of PID 9 and saw a capacitive behaviour...
Status description Johannes was away 3 weeks. Chaz and Hrand tested system with camera to `see` reverse moves. On 8/31/15 Hrand, Thomas, Matt, Chaz...
Target Testing Debug Found evidence for non moving positioners within target tests. E.g. PID 41 in Test 15 07 28 17 35 02 TargetRun did not move 192 times even...
Electronics and MSIM Testing CAL from MSIM seems to be much slower searching for reason and checking on trustworthiness of data. Peter wants to see a...
FPGA Firmware Update Put firmware on fpga, new software on comm board. tested Cal Command low level Pos. 123 S1 resistors are broken Pos....
Second Temperature Test Cycle After the first cycle (RT 17 5 5 1 RT) we plan to walk through the temp points in the same order At 5C we used the...
Check Out Positioner Failing Phenomen Charlie, Hrand and Matt looked into the reasons why some positioners were not working during some of the cold tests....
Check Out Positioner Failing Phenomen Charlie, Hrand and Matt looked into the reasons why some positioners were not working during some of the cold tests....
Going back to 5C Generated new Centers Link Lengths after going cold (xml 13) Generated Motor Maps from last 5C data (23rd and 27th April) xml 14 JohannesGross...
Positioner Functionality Overview DATE TAG TEMP PID 1 PID 5 PID 13 PID 17 PID 21 PID 25 PID 29 PID 33 PID 37 PID 41 PID...
Positioner Performance Overview DATE TAG TEMP PID 1 PID 5 PID 13 PID 17 PID 21 PID 25 PID 29 PID 33 PID 37 PID 41 PID...
COLD TEST RESULTS LOG DATE TAG TEMP Number Good Cobras Comments `15 03 19 11 03 04 TargetRun` RT 1,xx,13,17,21,25,29,33,37,xx,45,49,xx...
Bug Hunting MSIM failed again after target run with newly generated targets. Positioner 41 had a calculated angle of 418 We found a new case for Hrands...
Going cold Going from 17C to 0C today. Updated centers and link lengths with data from last test tonight. Positioner 33 came back to LIFE! Updated...
Rerunning Targets at 17 C Updated motor maps with new data from last target run and kicked off targets (yesterday). Reran centers script with phi further...
Target Testings Tedious Start Targets with newly produced centers and link lengths ran until 145. MSIM Crashed with new (unkow) error Produced new targets...
Getting Ready For Targets Again Identified Pos. 21 yesterday as the trouble maker. Link lengths of pos 21 are way off, centers too. Reran centers script...
Debugging findCentroids First problem with MSIM stalling out on findCentroids is due to a DLL problem. Workaround: run MSIM from MS Visual Studio findCentroids...
MSIM Problems Target Convergence Testing is still not succeeding. One issue with findCentroids was due to Matlab running on TB computer eating up too much RAM...
Swapped Driver Boards on 2/24/2015 Charlie and Peter installed Driver Board (SN 02) onto the module. Re connected all flex print cables from Cobras to the...
Electronics Issues Over the past 2 weeks the electronics have been not behaving as expected and most of the time have behaved erratically (sometimes working normal...
Hrand CrapSh t Tally !!! Loaded previous EM configs into Matlab as follows cfgA.cfgFile msimMaps 062414 stitched adj1.xml cfgB.cfgFile allMapsAdj 070114.xml...
Connect to camera using Remote CameraSetup NoCooling.lst Take test images using 2015 01 29 SingleExposure.lst Found .002s exposure was good for LED settings...
MOVE FROM CAHILL TO PHYSICS BUILDING HIGH BAY (SYNCOTRON) Peter and Charlie moved all hardware to the cold box located in Syncotron Test Cube w/ stages...
Released PFI CAD Models for Partner Use Attach CAD files to this page, `creating a link` to the file; organize into sections and headings as the list grows; comment...
Interval #8211; The combined time of the pulse duration and ringout time. One motor step occurs in one interval. Duration #8211; The length of time in which...
EM TEST REPORTS Test Directory in Dropbox TargetConvergence folder XML Used for Test XML Created from Test NOTES...
Update Testing Testing the new slow map updating on the 500 targets. Maps were generated using only the 600 targets from the two runs before. JohannesGross...
Testing new map updating Generated updated motor maps Increased ontime on pid 7 (without changing the motor map in order to test automated updating in the...
Target Testing Generated 500 targets for each Cobra Created script: 2014 10 15 TargetsEMSetC 500Targets.lst Started new target run Analysis of run...
Fast Map Re ran script to generate fast maps with more care taken in phi angle during theta map loops (keep closer to 90deg than 180deg) Merged FAST maps...
Re Do of Centers and Link Lenghts Examination of MSIM output from FASTmotormap run from 10/10 reveals that phi and theta are drifting when they aren`t commanded...
Fast Motor Maps Switched cabling from Set B to Set C Removed filters from camera Loaded `090314 setC allmaps adj3.xml` into MSIM for last known link...
Realized that the following tests used the wrong xml from SET C for the last couple SET B tests on move size study 10 01 14 09 12 33 moveSize 10...
Continue Testing Since the results with previous targets were bad on several positioners, another test with the previous target set is run. ChazMorantz...
Testing Positioner 7 First Run: Maps Updated with adjustMap, ontimes increased on 7 (before they were not consistent with the mmaps) Second Run: Maps Updated...
Positioner 122 testing Created adjusted Motor Map for J2 Forward by eyeballing overdampedness. NewMap OldMap 0.5 Main.Johannes 02 Sep 2014
Positioner 122 (7 in C) Centers While trying to measure centers for positioner 122 a very fast changing behavior occurred. When the centers script was first run...
Gravity Vector Testing Analyzed target run from overnight Ready to tilt test stand and take target data with change in gravity vector Tests while tilted...
Target Testing Targets finished overnight Analyzed results and adjusted maps. Hope that one more run will establish a stable baseline. 082514 setC...
Target Testing mSim crashed at target 74 during the night. performed analysis and adjustmaps.m on the shorter data set Re ran targets with `082514 setC...
Investigation into limited Phi range of motion Datasheet provided by NST upon delivery indicate that phi (stage 2) motor torque is right at minimum requirement...
Target Testing performance effects due to change in gravity Generated random targets for Set C Located at: Dropbox\PFS EM\TEST RESULTS\Targets\Set C...
Set C Setup Cabled set C Ran frequency sweep for all 16 axes (all sweeps looked clean) Loaded latest set C database (070914 set3 allmaps adj4.xml) into...
Set B Tilt/Focus Testing Theta Finished target 11 and 12 videos Archived data on Dropbox and ran Matlab: `analyzeTargetRun` on results Phi Copied...
Set B Tilt/Focus Testing Realized that yesterday I accidentally saved the Set E map over the Set B map instead of loading the Set B map into mSim. Copied...
Came in and switched the LED control back to Andor camera. Hrand updated MSIM Processed new centers and link lengths from last night with PID7 working and new ontimes...
RSS feed, ATOM feed, WebNotify, site changes, site map 
Topic revision: r3 - 2006-11-15 - TWikiContributor
Site map
Antarctica web
More...
Create New Topic
Index
Search
Changes
Notifications
Statistics
Preferences
Account 
Copyright © 2008-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback