Optical Alignment Data

Measured Lens Manufacturing Tolerances wrt Cell Datum Surfaces

All measurements were taken with a CMM (S/N: TBD). See excel worksheet for individual measurements.

• Units = inches, degrees
• Coordinate System = As defined by cell datum surfaces in assembly drawing
• ROC = Radius of Curvature
• Alpha = Rotation about the X axis (i.e. angle in the ZY plane)
• Beta = Rotation about the Y axis (i.e. angle in the ZX plane)
• S1 = Lens Surface 1
• S2 = Lens Surface 2

Updated September 1, 2009