EM TEST REPORTS
Test Directory in Dropbox TargetConvergence folder |
XML Used for Test |
XML Created from Test |
NOTES |
06_11_14_17_27_59_TargetRun |
|
|
|
06_12_14_17_42_30_TargetRun |
CobraConfig_061214_1 |
|
|
06_16_14_10_36_21_TargetRun |
CobraConfigAdjstd1 |
|
|
06_16_14_23_18_51_TargetRun |
CobraConfig_StrkMaps1_061214 |
|
|
06_17_14_11_21_32_TargetRun |
CobraCfg_StrkOrig_061714_1 |
CobraCfg_StrkAdj1_061714 |
|
06_17_14_22_41_35_TargetRun |
CobraCfg_StrkAdj1_061714 |
|
|
06_18_14_21_43_16_TargetRun |
CobraCfg_061814_newStrkMaps3 |
|
|
06_19_14_13_44_30_TargetRun |
CobraCfg_061914_hndAdj_DmpAdj |
|
Streak based motor maps adjusted for damping and by hand to flatten the ends of the maps near hardstops. |
All phi streak-based maps up to this point have been incorrectly shifted since the maps assume they start at zero deg on phi, but in reality that is not the case due to errors in fiber arm coupler alignment
Test Directory in Dropbox TargetConvergence folder |
XML Used for Test |
XML Created from Test |
NOTES |
06_26_14_17_18_33_TargetRun |
allMapsAllDone_062614 |
allMapsAllDone_062614_adj1 |
pId #1 needs to be turned off due to snagging. # steps requested exceeded 50,000(!) in many cases. pId2 also gets snagged and should be turned off |
06_23_14_17_00_09_TargetRun |
msimMaps_062314_1 |
dmpAdj_msimMaps_062314_1 |
|
06_23_14_12_19_58_TargetRun |
msimMaps_062214_4 |
|
Switched to 200 bin maps in MSIM update. Discovered bad orientation input for all positioners on this test. |
06_24_14_08_51_13_TargetRun |
dmpAdj_msimMaps_062314_1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Keep the table in chronological order with oldest at the top
* The MSIM XML folder on the testbed computer is D:\DevCodePft\Main\user\xml_files