Switching to Set B

• Re-cabled to Set B
• Connected to motors with NST pathway software to verify functionality and performed frequency sweep on all motors (good sweeps for every one).
• Loaded allMapsAdj_070114adj2.xml database into mSim (last xml used by Set B).
• Made new mSim script to capture that pid5 and pid6 are inverted on stage 1
• Started tilt script (4:36pm)
  • Aborted at first target convergence. Many of the positioners are struggling to converge.
• Made motor map script (2014_08_06_msimMotMap.lst) and ran overnight (using allMapsAdj_070114adj2.xml database)

-- ChazMorantz - 06 Aug 2014