CSFL upgrade purchase list:

1. Coarse Filter parts :

a. Filter enclosure : Mc Master CArr # 6882K1 Bttm-Load Hi Purity Single Cartridge Housing for 9-3/4 To 10" Cartridge Length, 1" Pipe Size In stock at $413.21 Each # of units = 2

b. replacement filter catridges: Mc Master #43765K22 Polyethersulfone Membrane Filter Cartridge Absolute,.45 Micron, Closed End 222 O-Ring, 9-3/4"

L, In stock at $77.78 Each # of units = 4

2. Pressure gauges:

a. Differential pressure gauge at coarse filter

Mc Master Carr #4232K115 (Same as 4232K1) High-Pressure Differential Gauge 316 Ss, 2-1/2" Dial, 1/4" NPT Female, 0 To 30 PSI In stock at $254.84 Each # of units = 2

b. pressure gauge at inlet manifold

Mc Master Carr # 4088K704 (Same as 4088K7) Glycerin-Filled Type 304-Ss Gauge 1% Accuracy 2-1/2" Dial, 1/4" Male NPT Lower Back, 0-100

PSI, In stock at $57.07 Each # of units = 2

c. pressure gauge at outlet manifold Mc Master Carr # 4088K701 (Same as 4088K7) Glycerin-Filled Type 304-Ss Gauge 1% Accuracy 2-1/2" Dial, 1/4" Male NPT Lower Back, 0-15 PSI In stock at $57.07 Each (Corrosive service grade) # of units = 2

2. Flowswitches:

Mcmaster Carr: #42015K21 (Same as 42015K2) Thermoplastic Piston-Actuated

Low-Flow Switch Polypropylene, .25 Gpm, 3/8" NPT Male Additionally wetted parts:Ryton, Type

316 SS, Fluorocarbon In stock at $45.82 Each

# of units: 12

3. Needle valves

Swagelok part # SS-18RS12 DEscription: SS Integral Bonnet Needle Valve, 1.80 Cv, 3/4 in. Swagelok Tube Fitting,

Regulating Stem

Swagelok Ventura (don't buy from swagelok in O.C. or L.A., these guys sell cheaper) CCFST 325 Balboa Circle Camarillo, CA 93012 Phone: 805-384-1060 Fax: 805-383-2046 info@ventura.swagelok.com

http://www.swagelok.com/downloads/webcatalogs/EN/MS-01-164.pdf

# of units = 2

4. Three way valves:

Swagelok Part #: SS-65XTF12-F16 Description: SS 3-Piece 60 Series 3-Way Ball Valve, Reinforced PTFE Seats, 3/4 in. FNPT x 3/4

in. FNPT x 1 in. FNPT # of units = 2

http://www.swagelok.com/downloads/webcatalogs/EN/MS-01-146.pdf

5. Pr. relief valve:

SS-RL4M8S8 Description: SS Low-Pressure Proportional Relief Valve, 1/2 in. MNPT x 1/2 in.

Swagelok Tube Fitting # of Units: 2

http://www.swagelok.com/downloads/webcatalogs/EN/MS-01-141.pdf Part #:

6. Manifolds:

McMaster? Carr # 5364K243 Polypropylene Distribution Manifold 8 Outlets, 1/2" NPT Inlet X

3/8" NPT Outlet In stock at $66.71 Each

# of units = 5

7. Rotameters

Part # 7530-3-2-2-2C08 (King Instrument part #, same part as what the current CSFL has) @ $xxx.xx/piece, 5 days lead time Description: Rotameter with valve, 1 GPM of water, w/ SS fittings, Viton O rings, 316L SS valve.

# of units = 15

King Instrument Company Address: 12700 Pala Drive Garden Grove, CA 92841 Phone: (714) 891-0008 Fax: (714) 891-0023

Distributor: (Call Ryan Herco, Burbank to order) Burbank Service Center 3010 N San Fernando Boulevard P.O. Box 588 Burbank, California 91503 Toll Free: (800) 848-1141 Fax: (818) 973-2600 e-mail: burbanksales@ryanherco.com

8. submicron filter:

Part # A-29880-02 Minntech Hollow Fiber Filter Capsules; 0.1 to 0.5 L/min Flow Range, 0.1 µm Pore Size (case of 6) @ $548.57 / case of 6

# of cases = 2 From www.ColeParmer.com

9. Second three way valve:

Cole Parmer Part # A-98150-01 PP Three-Way, Two-Position Elliptic Valve, 1/4" NPT(F) connectors @ $41.50 / each (USD)

units # : 15

10. Sheet metal

* 4x8 ft Al 6061-T6 sheet metal @ $385.00/piece *

# of pieces = 1

* or *

* 4x10 ft of CR steel ASTMA569 (14 GA) $80.00/piece *

Shapiro supply company Ph: 1-800-833-1259 FAX - 314-382-8557

11. Aluminum extrusion parts and accessories from Thorlabs

* 1 inch rails *

1. XE25L48 - 48" Long Construction Rail 4

2. XE25L20 - 20" Long Construction Rail 4

3. XE25T1 - Package of 10, Drop-In T1 nuts(1/4"-20)

4. XE25C - XE25 Cover Plate

5. XE25W3 - 3-Way Corner Cube (English or Metric). Requires SH6M10LP or SH25LP38 (channel

screws)

or

* 95 mm rails (compatible with casters)*

1. XT95-2000 - Syncrotron Flight Tube, 2.0m XT95 Rail $225.00

2. XT95-250 - Syncrotron Flight Tube, .25m XT95 Rail $55.00

3. XT95P8 - XT95 Caster $48.00

4. XT95P4 - Pivot support for XT95 rails $82.00

5. XT95N3 - T nuts with M6 thread $ 2.00

6. XT95C1 - 6 way corner cube $ 99.00

7. SH6M10LP - Low profile M6X10 screws (100 pack) $ 21.00