---+!! NGWFC Lab Environment ---++ MVME6100 ---+++ Boot parameters Uses oneo (128.171.96.192) as the boot host instead of deprecated kuhio. Oneo is a solaris-8 container setup specifically to replace kuhio and be the 'new' NGWFC build host. <verbatim> boot device : geisc0 processor number : 0 host name : host file name : /usr/local/vw/ngwfc/rtc/VxWorks_vec/default/vxWorks inet on ethernet (e) : 10.96.10.17 inet on backplane (b): host inet (h) : 128.171.96.192 gateway inet (g) : 10.96.0.1 user (u) : target ftp password (pw) (blank = use rsh): calabash flags (f) : 0x0 target name (tn) : ngwfc0 startup script (s) : <ngwfc/labStartupScript other (o) : </verbatim> ---+++ Console port connection * *telnet hqconsoles-2 2011* ---+++ Startup script ---++ Build host: *oneo* This is the development build and test host. It's a solaris-8 container modeled on makua, the current AO build server. The main reason for the creation of oneo, is to separate the development area for NGWFC upgrades and protect the controlled build area. This is the area that Microgate would also use to do their lab testing. ---+++ oneo:/kroot Oneo's /kroot is brand new and was built from scratch on 2010aug31. To do this the original makua /kroot link was removed (/home/aobld/kroot) and a new one on the filer was created and linked to. * oneo:/kroot -> /net/filer/vol/vol0/kroot/ngwfcdev_kroot Once we got the top level /kroot directory setup, the following command was used to checkout and build the core DCS hierarchy: * ~cm/swcm/default/autoBuildKROOT.csh krootCoreDCS -user -head This is checks out and build krootCore and adds DCS which contains EPCOM which is needed to build the AO subsystems. There were a couple of mods required to get the EPCOM and DCS parts to build. These were: * updated $KROOT/kss/epcom/Makefile as highlighted in red * KECK1 := $(shell for i in $(DIRS); do if [ ! -r $$i/default/Makefile ]; then $(DCSEPCOMBUILD) epcom $$i -head *%RED%-kroot%ENDCOLOR%*; fi; done) * did the same for $KROOT/kss/dcs/Makefile * added the following to ~/.cshrc * set path = ($path /home/cm/swcm/default ) * I am currently waiting on OID software to commit the latest AO subsystem changes which brings us up to EPICS R3.13.10 version.
This topic: Keck/NGAO
>
WebHome
>
ParOscRiskReduction
>
ParOscLabEnv
Topic revision: r3 - 2010-08-31 - KevinTsubota
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki?
Send feedback