rectange
Drag onto the page to add a rectangle with connection points and text that stays level when shape is rotated.
<no master>
sector,graphical
Drag onto the page to add a sector with adjustable size and orientation. Right-click to show complementary sector.
Resize Sector
arc,graphical
Drag to add an arc with adjustable size and orientation. Right-click to show complementary arc.
y arc.
arc.
llipse.
Resize Arc
rectangle,rounded
Drag onto the page to add a rectangular shape with adjustable, rounded ends.
nder tank).
f ends.
Change Roundness
This connector automatically routes between the shapes it connects.
Reposition Text
angle,uneven,diameter,dimension,engineering,measure,measurement
Drag onto the page, then drag the line ends to blue x's on the shape to be measured. Right-click for more options.
0;0DEG;0DEG;0DEG0MIN0SEC;0RAD
Angular Precision Formatting String
0=Dwg, 1=°, 2=deg, 3=° ' "", 4 = rad
0=Dwg, 1=°, 2=deg, 3=° ' ", 4 = rad
esc(0)
0.0\°
Degrees
90.0°
0.0
Change Dimension Angle
Resize Dimension
rectangle,chamfered
Drag onto the page to add a rectangle with adjustable chamfers on all four corners.
Resize Chamfer
Arc,3pt
Drag to add an arc defined by 3 points.
red arc.
les.
Reposition Perimeter Point
radius,outside,diameter,dimension,engineering,measure,measurement
Drag to add a dimension to an arc or circle. Place line end at arc center, and yellow diamond on arc.
0;0FT 0IN;0.0FT;0IN;0FT;0MI;0 MM;0 CM;0 M;0 KM
Linear Precision Formatting String
0=Dwg, 1=Arch, 2=Dec Ft, 3+ = other
Place on Arc
Use Drawing Page's Units;Feet-Inch (1'-0");Feet (1.00');Inches;Feet (1.00ft);Miles;Millimeters;Centimeters;Meters;Kilometers
_H&ide Crosshair
Use Drawing Page's Units
0.00
0.25
Don't Show Units
0
Horizontal,outside,baseline,dimension,engineering,measure,measurement
0.50
Change Dimension Height
angle,even,dimension,engineering,measure,measurement
Change Extension Line Length
ellipse,oval,basic
Drag the shape onto the drawing page.
ragging any selection handle.
eccentricity.
aligned,even,vertical,dimension,engineering,measure,measurement
Use to add an aligned dimension with equal length extension lines and dimension text between the extension lines.
1.00
horizontal,dimension,engineering,measure,measurement
vertical,dimension,engineering,measure,measurement
circle,ellipse,round,ring
Drag onto the page to add a circle or ellipse with text that stays level when shape is rotated.
circle,radius,round,ring
Drag onto the page to add a circle defined by radius. Drag yellow diamond to adjust curvature.
Change Curvature
aligned,out,even,vertical,dimension,engineering,measure,measurement
aligned,out,uneven,vertical,dimension,engineering,measure,measurement
Reposition Extension Line
aligned,uneven,vertical,dimension,engineering,measure,measurement
stud,weld,welding,symbol,mechanical,engineering,schematic
vertical,outside,dimension,engineering,measure,measurement
C:\Program Files (x86)\Microsoft Office\Office12\1033\ANNOT_U.VSS
C:\Program Files (x86)\Microsoft Office\Office12\1033\DIMENG_U.VSS
C:\Program Files (x86)\Microsoft Office\Office12\1033\DRAWTL_U.VSS
C:\Program Files (x86)\Microsoft Office\Office12\1033\FASTN1_U.VSS
C:\Program Files (x86)\Microsoft Office\Office12\1033\FASTN2_U.VSS
C:\Program Files (x86)\Microsoft Office\Office12\1033\GDT_U.VSS
C:\Program Files (x86)\Microsoft Office\Office12\1033\SPRBR_U.VSS
C:\Program Files (x86)\Microsoft Office\Office12\1033\TITLE_U.VSS
C:\Program Files (x86)\Microsoft Office\Office12\1033\WELD_U.VSS
"
Arc - graphical
Rectangle
11.30
12.45
5.00
2.50
1.20
15.64
3.79
3.00
2.18
3.32
4.48
3.99
4.21
5.75
0.72
0.29
0.75
0.90
3.30
0.64
0.76
5.39
Rounded rectangle
Chamfered rectangle
21.69
6.86
9.04
13.78
5.04
8.18
7.04
Circle - radius
7.25
6.70
8.09
14.00
13.51
3.70
Arial Unicode MS
Symbol
Wingdings
Arial
SimSun
PMingLiU
MS PGothic
Dotum
Sylfaen
Estrangelo Edessa
Vrinda
Shruti
Mangal
Tunga
Sendnya
Raavi
Dhenu
Latha
Gautami
Cordia New
MS Farsi
Gulim
Times New Roman
Arial Narrow
Calibri
Guide
TheDoc
Page-1
Gesture Format
AskOnDrop
LPrec
visVersion
LUnits
Vertical outside
ShowUnits
Sector - graphical
visNorthAngle
Row_1
APrec
Vertical
AUnits
msvNoAutoConnect
Callout
Black fill
Dimension
Hairline
Fastener
Threads
Hidden detail
GDT Normal
GDT Callout
GDT Left text
Bearing
Hatch 1
Hatch 2
White fill
Block
Block label left
Block label center
Weld arrow
Weld
Row_2
Row_3
WatchCH1
MaxRoundess
Angle even
Connector
Dynamic connector
TextPosition
Angle uneven
AntiScale
AUnitsFactor
FormatString
AngleText
Angle
APFString
APrecInd
APrecVal
AUnitsInd
AUnitsVal
Row_4
Row_5
Extensions
Horizontal.506
Circle, ellipse
Stud
Vertical outside.88
ChamSize
Stud.84
Arc - graphical.119
Vertical outside.89
Horizontal.508
Vertical.507
Vertical.509
Vertical.510
Vertical.511
Arc - graphical.120
Aligned even.123
Arc - graphical.13
Arc - graphical.26
Arc - graphical.12
Rectangle.20
Arc - graphical.27
Vertical.31
Vertical.34
Horizontal.35
Arc: 3pt.
Radius
LUnitsFactor
LengthText
Length
LPFString
LPrecInd
LPrecVal
LUnitsInd
LUnitsVal
ShowUnitsInd
ShowUnitsVal
FeetInch
Feet
Inch
InchPrec
Horizontal outside
LocEndX
LocEndY
visObjectType
DrawingUnitFactor
Vertical.32
Rectangle.427
Vertical outside.90
Aligned even.473
Aligned out even
Arc - graphical.52
Arc - graphical.53
Aligned out uneven
Arc - graphical.87
Aligned uneven
Arc - graphical.91
Arc - graphical.97
Rounded rectangle.307
Arc - graphical.38
Arc - graphical.39
Arc - graphical.45
Arc - graphical.46
Arc - graphical.57
Arc - graphical.58
Vertical.65
Rectangle.349
Arc - graphical.353
Arc - graphical.354
Vertical.66
Vertical.67
Vertical.68
Vertical.69
Vertical.70
Arc - graphical.98
Arc - graphical.359
Arc - graphical.360
Aligned even
Chamfered rectangle.396
Chamfered rectangle.397
Arc - graphical.102
Arc - graphical.103
Horizontal
Vertical.109
Arc - graphical.413
Arc - graphical.438
Arc - graphical.442
Arc - graphical.443
Vertical.110
Vertical.111
Arc - graphical.456
Arc - graphical.457
Arc - graphical.461
Arc - graphical.462
Basic
Ellipse
Vertical.112
Vertical outside.115
Vertical outside.116
Vertical outside.117
Vertical outside.118