2014_08_18_SetB < Subaru/PFS

---++ Set B Tilt/Focus Testing
   * Cabling up Set B
   * Performed frequency sweep on all axes (all looked clean)
   * Loaded mSim database: allMapsAdj_070114adj2.xml
   * Copied and replaced Set B Theta Targets

---+++ Theta Tilt/Focus Testing
   * Loaded and ran mSim script: 2014_08_06_ThetaTilt_setB.lst
   * Aborted script and manually adjusted neighbors out of the way then re-started the script.
   * Aborted script again after 1st target.  Only pId 5,6,8 are converging.  pId 1,2 are not expected to perform well (flex interference), but the other 4 positioners are not behaving.

-- Main.ChazMorantz - 18 Aug 2014

This topic: Subaru/PFS > WebHome > POSitionerEM > POSEM_AL > 2014_08_18_SetB
Topic revision: r1 - 2014-08-18 - ChazMorantz