Switching to Set B
- Re-cabled to Set B
- Connected to motors with NST pathway software to verify functionality and performed frequency sweep on all motors (good sweeps for every one).
- Loaded allMapsAdj_070114adj2.xml database into mSim (last xml used by Set B).
- Made new mSim script to capture that pid5 and pid6 are inverted on stage 1
- Started tilt script (4:36pm)
- Aborted at first target convergence. Many of the positioners are struggling to converge.
- Made motor map script (2014_08_06_msimMotMap.lst) and ran overnight (using allMapsAdj_070114adj2.xml database)
--
ChazMorantz - 06 Aug 2014
This topic: Subaru/PFS
> WebHome >
POSitionerEM >
POSEM_AL > 2014_08_06_SetD
Topic revision: r1 - 2014-08-06 - ChazMorantz