CSFLUpgrade < Palomar/PalmLGS

---+++ CSFL upgrade purchase list:

---++ 1. Coarse Filter parts : 

*a. Filter enclosure :* Mc Master CArr # 6882K1 
Bttm-Load Hi Purity Single Cartridge Housing for 9-3/4 To 10" Cartridge Length, 1" Pipe Size 
In stock at $413.21 
Each # of units = 2 

*b. replacement filter catridges:* Mc Master #43765K22 
Polyethersulfone Membrane Filter Cartridge Absolute,.45 Micron, Closed End 222 O-Ring, 9-3/4" 

L, In stock at $77.78 Each 
# of units =  4 

---++2. Pressure gauges: 

*a. Differential pressure gauge at coarse filter*

Mc Master Carr #4232K115 (Same as 4232K1) 
High-Pressure Differential Gauge 316 Ss, 2-1/2" Dial, 1/4" NPT Female, 0 To 30 PSI 
In stock at $254.84 Each 
# of units = 2 
 
*b. pressure gauge at inlet manifold*

Mc Master Carr # 4088K704
(Same as 4088K7) 
Glycerin-Filled Type 304-Ss Gauge 1% Accuracy 2-1/2" Dial, 1/4" Male NPT Lower Back, 0-100 

PSI, In stock at $57.07 Each 
# of units = 2 
 

*c. pressure gauge at outlet manifold*
Mc Master Carr # 4088K701 (Same as 4088K7) 
Glycerin-Filled Type 304-Ss Gauge 1% Accuracy 2-1/2" Dial, 1/4" Male NPT Lower Back, 0-15 PSI 
In stock at $57.07 Each (Corrosive service grade) 
# of units = 2 
 

---++2. Flowswitches: 

Mcmaster Carr: #42015K21 (Same as 42015K2) Thermoplastic Piston-Actuated 

Low-Flow Switch Polypropylene, .25 Gpm, 3/8" NPT Male Additionally wetted parts:Ryton, Type 

316 SS, Fluorocarbon In stock at $45.82 Each 

# of units: 12 

---++3. Needle valves 

Swagelok part # SS-18RS12  
DEscription: SS Integral Bonnet Needle Valve, 1.80 Cv, 3/4 in. Swagelok Tube Fitting, 

Regulating Stem  

Swagelok Ventura (don't buy from swagelok in O.C. or L.A., these guys sell cheaper)
CCFST
325 Balboa Circle
Camarillo, CA 93012
Phone:  805-384-1060
Fax:  805-383-2046
info@ventura.swagelok.com 

http://www.swagelok.com/downloads/webcatalogs/EN/MS-01-164.pdf

# of units = 2 

---++4. Three way valves:
Swagelok Part #: SS-65XTF12-F16 
Description: SS 3-Piece 60 Series 3-Way Ball Valve, Reinforced PTFE Seats, 3/4 in. FNPT x 3/4 

in. FNPT x 1 in. FNPT 
# of units = 2

http://www.swagelok.com/downloads/webcatalogs/EN/MS-01-146.pdf 

---++5. Pr. relief valve: 
SS-RL4M8S8 Description: SS Low-Pressure Proportional Relief Valve, 1/2 in. MNPT x 1/2 in. 

Swagelok Tube Fitting 
# of Units: 2 

http://www.swagelok.com/downloads/webcatalogs/EN/MS-01-141.pdf Part #: 

---++6. Manifolds: 

McMaster? Carr # 5364K243 Polypropylene Distribution Manifold 8 Outlets, 1/2" NPT Inlet X 

3/8" NPT Outlet In stock at $66.71 Each 

# of units = 5

---++7. Rotameters 
Part # 7530-3-2-2-2C08 (King Instrument part #, same part as what the current CSFL has) @ $xxx.xx/piece, 5 days lead time
Description: Rotameter with valve, 1 GPM of water, w/ SS fittings, Viton O rings, 316L SS valve.

# of units = 15

King Instrument Company
Address: 12700 Pala Drive Garden Grove, CA 92841
Phone: (714) 891-0008
Fax: (714) 891-0023

Distributor: (Call Ryan Herco, Burbank to order)
Burbank Service Center
3010 N San Fernando Boulevard
P.O. Box 588
Burbank, California 91503
Toll Free: (800) 848-1141
Fax: (818) 973-2600
e-mail: burbanksales@ryanherco.com


---++8. submicron filter:
Part # A-29880-02
Minntech Hollow Fiber Filter Capsules; 0.1 to 0.5 L/min Flow Range, 0.1 µm Pore Size (case of 6) @ $548.57 / case of 6

# of cases = 2
From www.ColeParmer.com

---++9. Second three way valve:
Cole Parmer Part # A-98150-01
PP Three-Way, Two-Position Elliptic Valve, 1/4" NPT(F) connectors @ $41.50 / each  (USD) 

units # : 15

---++10. Sheet metal

* 4x8 ft Al 6061-T6 sheet metal @ $385.00/piece *

# of pieces = 1

* or  *

* 4x10 ft of CR steel ASTMA569 (14 GA) $80.00/piece *

Shapiro supply company
Ph: 1-800-833-1259
FAX - 314-382-8557

---++ 11. Aluminum extrusion parts and accessories from Thorlabs

* 1 inch rails *

1. XE25L48 - 48" Long Construction Rail 4

2. XE25L20 - 20" Long Construction Rail 4

3. XE25T1 - Package of 10, Drop-In T1 nuts(1/4"-20)

4. XE25C - XE25 Cover Plate 

5. XE25W3 - 3-Way Corner Cube (English or Metric). Requires SH6M10LP or SH25LP38 (channel 

screws)  

or 

* 95 mm rails  (compatible with casters)*

1. XT95-2000 - Syncrotron Flight Tube, 2.0m XT95 Rail  $225.00   

2. XT95-250 - Syncrotron Flight Tube, .25m XT95 Rail   $55.00  

3. XT95P8 - XT95 Caster  				     $48.00  

4. XT95P4 - Pivot support for XT95 rails		     $82.00

5. XT95N3 - T nuts with M6 thread			     $ 2.00	

6. XT95C1 - 6 way corner cube			     $ 99.00

7. SH6M10LP - Low profile M6X10 screws (100 pack)	     $ 21.00
This topic: Palomar/PalmLGS > CSFLUpgrade
Topic revision: r3 - 2006-06-01 - ViswaVelur