Command | Description |
---|---|
f1 xx.xx | move actuator 1 to xx.xx microns. |
f2 xx.xx | move actuator 2 to xx.xx microns. |
f3 xx.xx | move actuator 3 to xx.xx microns. |
fcs_online | puts the FCS controller into online mode. Or use the modify -s mfcs online=1. |
run_mfcs | runs the FCS server. |
fcsvolt | show the voltages of the three actuators. |
fcspos | shows the positions in microns of the three actuators. |
stop_mfcs | shutdown the FCS server. |