Forgot your password?
Document Actions
DBSP Display GUI
Settimgs for the Real Time Display (RTD)
The system can use Ximtool or DS9 (SAO image) as Real time displays. These needs to be started independently; window only allows to set a couple of parameters from these devices. There are separate displays for th BLUE and the RED sides
display: enables or disables the Real Time Display. If enabled, it will display the image while it is being read (in "Real Time"). If it is disbaled, the image will not be displayed automatically.
The rest of the buttons will be unabled only if display is enabled.
autoscale: If enabled, the RTD will select automatically the upper and lower values to be mapped. If disabled, the user can enter the desired values (z1 as the lower, z2 as the upper) for the display mapping
z1, z2: the user-selected values for the mapping. These fields will be enabled only if autoscale is disabled
scaling type: type of scaling desired. It can be: unitary, logarithmic or linear (usual)
current: these are status only. They will show the current z1 and z2 being used for the mapping. If autoscale is enabled, they will show the values auto-selected on the display, if autoscale is disabled, they will show the use-selected values on the z1 and z2 controls
The system can use Ximtool or DS9 (SAO image) as Real time displays. These needs to be started independently; window only allows to set a couple of parameters from these devices. There are separate displays for th BLUE and the RED sides
display: enables or disables the Real Time Display. If enabled, it will display the image while it is being read (in "Real Time"). If it is disbaled, the image will not be displayed automatically.
The rest of the buttons will be unabled only if display is enabled.
autoscale: If enabled, the RTD will select automatically the upper and lower values to be mapped. If disabled, the user can enter the desired values (z1 as the lower, z2 as the upper) for the display mapping
z1, z2: the user-selected values for the mapping. These fields will be enabled only if autoscale is disabled
scaling type: type of scaling desired. It can be: unitary, logarithmic or linear (usual)
current: these are status only. They will show the current z1 and z2 being used for the mapping. If autoscale is enabled, they will show the values auto-selected on the display, if autoscale is disabled, they will show the use-selected values on the z1 and z2 controls