POSITIONER EM WIKI PAGE


CONFIGURATION MANAGEMENT

TESTBED ACTIVITY LOGS

EM PROCEDURES

EM Test Reports

CURRENT EM RAIL CONFIG

COBRA RAIL * Theta FW Theta RV Phi FW Phi RV INVERTED Current Performance
  POSITION ontime ontime ontime ontime   MSIM ID SNR@iter[date]
EM1 121 01 .07 .13 .05 .05 no 1 0.969@5[2014-06-24 Tue]
EM1 117 02 .06 .10 .06 .07 no   flex interference
EM1 105 03 .12 .10 .06 .05 no   1.019@5[2014-07-11 Fri] body interference due to kapton tape
EM1 123 04 .07 .09 .05 .05 no 2 0.935@5[2014-06-24 Tue]
EM1 109 05 .18 .20 .05 .05 no   flex interference
EM2 141 06 .06 .08 .06 .05 no   1.023@6[2014-07-15 Tue]
EM2 152 07 .13 .13 .05 .05 no   1.000@6[2014-06-24 Tue] Shaft Coupler de-bonded
EM2 145 08 .08 .08 .05 .05 no 3 1.031@4[2014-07-02 Wed]
EM2 151 09 .12 .10 .06 .05 no   1.013@6[2014-07-15 Tue]
EM2 143 10 .07 .07 .05 .05 no 4 0.931@6[2014-06-24 Tue]
EM2 150 11 .04 .06 .05 .05 no   1.028@4[2014-07-02 Wed]
EM2 146 12 .06 .08 .06 .06 no   1.029@5[2014-07-09 Wed]
EM2 149 13         no 5 nonfunctional - bad electronics driver, swapped out for 2nd set
EM1 101 14 .04 .08 .05 .05 yes   1.021@4[2014-07-02 Wed]
EM1 108 15 .08 .08 .1 (was .06) .1 (was .07) no   1.026@4[2014-07-11 Fri]
EM1 104 16 .11 .11 .05 .05 yes 6 nonfunctional - Theta would not move, no frequency peak during sweep
EM1 102 17 .10 .10 .06 .08 yes   1.018@4[2014-07-02 Wed]
EM2 144 18 .06 .08 .06 .05 no   1.035@3[2014-07-10 Thu]
EM2 142 19 .15 .15 .05 .05 no 7 0.989@9[2014-06-24 Tue]
EM1 118 20 .30 .18 .05 .05 no   0.993@7[2014-07-02 Wed]
EM1 122 21 .2 (was .14) .26 (was .14) .07 .06 no   nonfunctional - does not reliably move through ROM
EM1 103 22 >.3 >.3 .05 .05 yes   flex interference
EM1 116 23 .08 .08 .05 .05 no 8 1.029@4[2014-07-02 Wed]
EM2 147 24 .08 .08 .06 .05 no   1.033@4[2014-07-09 Wed]
EM1 112 25 .07 .09 .05 .05 no 9 0.983@5[2014-06-24 Tue]
EM1 106 26 .08 .10 .05 .05 no   1.012@5[2014-07-02 Wed]
EM1 110 27 .04 (was .10) .06 (was .08) .06 .05 no   0.897@9[2014-07-11 Fri] flex interferencs. inteference went away so not sure if it was flex or not
NONE 28              

INITIAL EM RAIL CONFIG [5 cobras]

COBRA RAIL POSITION * MSIM ID
EM_105 1 1.1
EM_123 2 1.2
EM_117 3 1.3
EM_121 4 1.4
EM_109 5 1.5
*Right to left looking at the Cobra tips

FIDUCIAL CONFIG

FIDUCIAL LOCATION
1 See C:\Users\cmorantz\Dropbox\PFS_EM\SVN\MATLAB\CurrentEMConfig.m
2 See C:\Users\cmorantz\Dropbox\PFS_EM\SVN\MATLAB\CurrentEMConfig.m
3 See C:\Users\cmorantz\Dropbox\PFS_EM\SVN\MATLAB\CurrentEMConfig.m
Edit | Attach | Watch | Print version | History: r54 | r26 < r25 < r24 < r23 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r24 - 2014-07-18 - ChazMorantz
 
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback