---+ *POSITIONER EM WIKI PAGE* --- ---++ [[POSEM_CM][CONFIGURATION MANAGEMENT]] ---++ [[POSEM_AL][TESTBED ACTIVITY LOGS]] ---++ [[POSEM_PROC][EM PROCEDURES]] ---++ [[EMTestReports][EM Test Reports]] ---++CURRENT EM RAIL CONFIG | *COBRA* | *RAIL !* * | *Theta FW* | *Theta RV* | *Phi FW* | *Phi RV* | *INVERTED* | *Current* | *Performance* | | | *POSITION* | *ontime* | *ontime* | *ontime* | *ontime* | | *MSIM ID* | *SNR@iter[date]* | | EM1 121 | 01 | .07 | .13 | .05 | .05 | no | | 0.969@5[2014-06-24 Tue] | | EM1 117 | 02 | .06 | .10 | .06 | .07 | no | | flex interference | | EM1 105 | 03 | .12 | .10 | .06 | .05 | no | 1 | 1.019@5[2014-07-11 Fri] body interference due to kapton tape | | EM1 123 | 04 | .07 | .09 | .05 | .05 | no | | 0.935@5[2014-06-24 Tue] | | EM1 109 | 05 | .18 | .20 | .05 | .05 | no | | flex interference | | *EM2 141* | 06 | .06 | .08 | .06 | .05 | no | 2 | 1.023@6[2014-07-15 Tue] | | *EM2 152* | 07 | .13 | .13 | .05 | .05 | no | | 1.000@6[2014-06-24 Tue] Shaft Coupler de-bonded | | *EM2 145* | 08 | .08 | .08 | .05 | .05 | no | | 1.031@4[2014-07-02 Wed] | | *EM2 151* | 09 | .12 | .10 | .06 | .05 | no | 3 | 1.013@6[2014-07-15 Tue] | | *EM2 143* | 10 | .07 | .07 | .05 | .05 | no | | 0.931@6[2014-06-24 Tue] | | *EM2 150* | 11 | .04 | .06 | .05 | .05 | no | | 1.028@4[2014-07-02 Wed] | | *EM2 146* | 12 | .06 | .08 | .06 | .06 | no | 4 | 1.029@5[2014-07-09 Wed] | | *EM2 149* | 13 | | | | | no | | nonfunctional - bad electronics driver, swapped out for 2nd set | | EM1 101 | 14 | .04 | .08 | .05 | .05 | yes | | 1.021@4[2014-07-02 Wed] | | EM1 108 | 15 | .08 | .08 | .1 (was .06) | .1 (was .07) | no | 5 | 1.026@4[2014-07-11 Fri] thetafreq1=65.274 | | EM1 104 | 16 | .11 | .11 | .05 | .05 | yes | | nonfunctional - Theta would not move, no frequency peak during sweep | | EM1 102 | 17 | .10 | .10 | .06 | .08 | yes | | 1.018@4[2014-07-02 Wed] | | *EM2 144* | 18 | .06 | .08 | .06 | .05 | no | 6 | 1.035@3[2014-07-10 Thu] | | *EM2 142* | 19 | .15 | .15 | .05 | .05 | no | | 0.989@9[2014-06-24 Tue] | | EM1 118 | 20 | .30 | .18 | .05 | .05 | no | | 0.993@7[2014-07-02 Wed] | | EM1 122 | 21 | .2 (was .14) | .26 (was .14) | .07 | .06 | no | 7 | nonfunctional - does not reliably move through ROM | | EM1 103 | 22 | >.3 | >.3 | .05 | .05 | yes | | flex interference | | EM1 116 | 23 | .08 | .08 | .05 | .05 | no | | 1.029@4[2014-07-02 Wed] | | *EM2 147* | 24 | .08 | .08 | .06 | .05 | no | 8 | 1.033@4[2014-07-09 Wed] | | EM1 112 | 25 | .07 | .09 | .05 | .05 | no | | 0.983@5[2014-06-24 Tue] | | EM1 106 | 26 | .08 | .10 | .05 | .05 | no | | 1.012@5[2014-07-02 Wed] | | EM1 110 | 27 | .04 (was .10) | .06 (was .08) | .06 | .05 | no | 9 | 0.897@9[2014-07-11 Fri] flex interferencs. inteference went away so not sure if it was flex or not | | NONE | 28 | | | | | | | | ---++INITIAL EM RAIL CONFIG [5 cobras] | *COBRA* | *RAIL POSITION !* * | *MSIM ID* | | EM_105 | 1 | 1.1 | | EM_123 | 2 | 1.2 | | EM_117 | 3 | 1.3 | | EM_121 | 4 | 1.4 | | EM_109 | 5 | 1.5 | !*Right to left looking at the Cobra tips ---+++FIDUCIAL CONFIG | *FIDUCIAL* | *LOCATION* | | 1 | See C:\Users\cmorantz\Dropbox\PFS_EM\SVN\MATLAB\CurrentEMConfig.m | | 2 | See C:\Users\cmorantz\Dropbox\PFS_EM\SVN\MATLAB\CurrentEMConfig.m | | 3 | See C:\Users\cmorantz\Dropbox\PFS_EM\SVN\MATLAB\CurrentEMConfig.m |
This topic: Subaru/PFS
>
WebHome
>
POSitionerEM
Topic revision: r23 - 2014-07-18 - ChazMorantz
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki?
Send feedback