On-Time Tuning
- Manually move all cobras (not just the ones of interest) to home positions (make sure you have gloves on)
- Generate ROM Scripts using Matlab function:
Dropbox\PFS_EM\SVN\MATLAB\ontimeTuning.m
- ROM Script filenames shall follow the convention: YYYY_MM_DD_(theta/phi)(Fwd/Rev)_onTimeTuning.lst (Example: 2014_06_09_thetaFwd_onTimeTuning.lst)
- Execute ROM Scripts with MSIM
- Change names of test directories to follow convention: MM_DD_YY_HH_MM_SS_(theta/phi)(Fwd/Rev)_onTimeTuning
- Start the Cobra ROM check script
- All 9 positioners should move to +HS with assumed on-time settings
- At the first pause in the script, check that theta and phi are in +HS
- Resume script
- When script is complete, check that theta and phi are in their -HS (home pos)
- If theta and phi did not reach their hard-stops then on-time values assumed by on-time tuning script may need to be adjusted.
--
ChazMorantz - 28 May 2014
This topic: Subaru/PFS
> WebHome >
POSitionerEM > POSEM_PROC
Topic revision: r2 - 2014-06-11 - ChazMorantz