EM TEST REPORTS

Test Directory in Dropbox TargetConvergence folder XML Used for Test XML Created from Test NOTES
06_11_14_17_27_59_TargetRun      
06_12_14_17_42_30_TargetRun CobraConfig_061214_1    
06_16_14_10_36_21_TargetRun CobraConfigAdjstd1    
06_16_14_23_18_51_TargetRun CobraConfig_StrkMaps1_061214    
06_17_14_11_21_32_TargetRun CobraCfg_StrkOrig_061714_1 CobraCfg_StrkAdj1_061714  
06_17_14_22_41_35_TargetRun CobraCfg_StrkAdj1_061714    
06_18_14_21_43_16_TargetRun CobraCfg_061814_newStrkMaps3    
06_19_14_13_44_30_TargetRun CobraCfg_061914_hndAdj_DmpAdj   Streak based motor maps adjusted for damping and by hand to flatten the ends of the maps near hardstops.
All phi streak-based maps up to this point have been incorrectly shifted since the maps assume they start at zero deg on phi, but in reality that is not the case due to errors in fiber arm coupler alignment
Test Directory in Dropbox TargetConvergence folder XML Used for Test XML Created from Test NOTES
06_23_14_12_19_58_TargetRun msimMaps_062214_4   Switched to 200 bin maps in MSIM update. Discovered bad orientation input for all positioners on this test.
06_23_14_17_00_09_TargetRun msimMaps_062314_1 dmpAdj_msimMaps_062314_1  
06_24_14_08_51_13_TargetRun dmpAdj_msimMaps_062314_1    
06_26_14_17_18_33_TargetRun allMapsAllDone_062614 allMapsAllDone_062614_adj1 pId #1 needs to be turned off due to snagging. # steps requested exceeded 50,000(!) in many cases. pId2 also gets snagged and should be turned off
06_27_14_09_41_28_TargetRun allMapsAllDone_062614_adj1 allMapsAllDone_062614_adj2 reverse maps have not been updated. odd data for pId7 on the error vs request plot
06_30_14_22_33_28_dotObscurePhi allMapsAllDone_062614_adj1 none Dot Obscuration Testing. Same target 50 times
07_01_14_10_12_08_TargetRun allMapsAllDone_062614 allMapsAdj_070114 re-do with original maps to test new motor map analysis/update methods
07_01_14_17_09_05_TargetRun allMapsAdj_070114 allMapsAdj_070114adj1 updated both POS and NEG maps
07_01_14_22_49_02_TargetRun allMapsAdj_070114adj1 allMapsAdj_070114adj2  
07_02_14_09_07_18_TargetRun allMapsAdj_070114adj2    
07_09_14_16_37_46_TargetRun 070914_set3_allmaps 070914_set3_allmaps_adj1 first target run with 3rd set of Cobras
07_10_14_16_51_12_TargetRun 070914_set3_allmaps_adj1 070914_set3_allmaps_adj2 use adj3 map for next run - same as adj2, but with pid2/J1/rev from 070914_set3_allmaps.xml
07_11_14_19_29_30_TargetRun 070914_set3_allmaps_adj3 070914_set3_allmaps_adj4  
07_14_14_08_25_24_TargetRun 070914_set3_allmaps_adj4   updating enabled
       
       

* Keep the table in chronological order with oldest at the top * The MSIM XML folder on the testbed computer is D:\DevCodePft\Main\user\xml_files

Edit | Attach | Watch | Print version | History: r68 | r16 < r15 < r14 < r13 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r14 - 2014-07-14 - ChazMorantz
 
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback