FPGA Firmware Update
- Put firmware on fpga, new software on comm-board.
- tested Cal-Command low level
- Pos. 123 S1 resistors are broken
- Pos. 109 S2 is not working.
- CAL is really fast -> positioners running into each other and shaking heavily at fiber tip.
- Two more days of debugging with Hrand and Thomas and system was working end of the week.
--
JohannesGross - 06 Jul 2015
This topic: Subaru/PFS
> WebHome >
POSitionerEM >
POSEM_AL > 2015_07_06
Topic revision: r2 - 2015-07-13 - JohannesGross