- Connect to camera using Remote_CameraSetup_NoCooling.lst
- Take test images using 2015_01_29_SingleExposure.lst
- Found .002s exposure was good for LED settings we inherited from old setup. Did not touch the LED settings
- Pulled out rough positions of fiducials from test image
ImageJ |
1629 + 198i |
1239 + 571i |
851 + 941i |
463 + 1313i |
74 + 1685i |
MSIM |
1629 + 1850i |
1239 + 1477i |
851 + 1107i |
463 + 735i |
74 + 363i |
- Ran dark and bias image script 2015_01_29_DarkBias.lst with .002s exposure for darks
- Input new centroids to fiducial measurement script and ran it. 2014_01_29_FiducialMeasurements.lst
- Made it to 93 images and then MSIM hung on one of the image commands.
- The centroid log contains multiple Fid coordinates on each line which is not how it used to be formatted. The entries are inconsistent with one another on each line with some of them often being whole numbers. Log is attached here and also saved here: D:\PfsTests\01_29_15_15_46_37_FiducialStudy\Log
- I've attached the bad log and also a good log from previous tests.
- MSIM Crashed multiple times while taking images
This topic: Subaru/PFS
> WebHome >
POSitionerEM >
POSEM_AL > 2015_01_29
Topic revision: r2 - 2015-01-30 - CharlieFisher