---++ Gravity Vector Testing * Analyzed target run from overnight * Ready to tilt test stand and take target data with change in gravity vector ---+++ Tests while tilted * 7 blocks of 7/8" thick plywood placed under feet on side of fixture (side closest to the door) * Measured tilt of system with iPhone level = 8.2deg (measured at Module bracket...right next to the rail) * Ran targets using '082514_setC_allmaps_adj4' map * Analyzed results and ran adjust maps, but did not load new motor map. * Ran another target run using '082514_setC_allmaps_adj4' map * Analyzed results and ran adjust maps, but did not load new motor map. * Ran a third target run using '082514_setC_allmaps_adj4' map. This should be the last of the gravity vector tests -- Main.ChazMorantz - 28 Aug 2014
This topic: Subaru/PFS
>
WebHome
>
POSitionerEM
>
POSEM_AL
>
2014_08_28
Topic revision: r4 - 2014-08-29 - ChazMorantz
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki?
Send feedback