Gravity Vector Testing
- Analyzed target run from overnight
- Ready to tilt test stand and take target data with change in gravity vector
Tests while tilted
- 7 blocks of 7/8" thick plywood placed under feet on side of fixture (side closest to the door)
- Measured tilt of system with iPhone level = 8.2deg (measured at Module bracket...right next to the rail)
- Ran targets using '082514_setC_allmaps_adj4' map
- Analyzed results and ran adjust maps, but did not load new motor map.
- Ran another target run using '082514_setC_allmaps_adj4' map
- Analyzed results and ran adjust maps, but did not load new motor map.
- Ran a third target run using '082514_setC_allmaps_adj4' map. This should be the last of the gravity vector tests
--
ChazMorantz - 28 Aug 2014
This topic: Subaru/PFS
> WebHome >
POSitionerEM >
POSEM_AL > 2014_08_28
Topic revision: r4 - 2014-08-29 - ChazMorantz