Gravity Vector Testing

• Analyzed target run from overnight
  • Ready to tilt test stand and take target data with change in gravity vector

Tests while tilted

• 7 blocks of 7/8" thick plywood placed under feet on side of fixture (side closest to the door)
  • Measured tilt of system with iPhone level = 8.2deg (measured at Module bracket...right next to the rail)
• Ran targets using '082514_setC_allmaps_adj4' map
  • Analyzed results and ran adjust maps, but did not load new motor map.
• Ran another target run using '082514_setC_allmaps_adj4' map
  • Analyzed results and ran adjust maps, but did not load new motor map.
• Ran a third target run using '082514_setC_allmaps_adj4' map. This should be the last of the gravity vector tests

-- ChazMorantz - 28 Aug 2014