Set B Tilt/Focus Testing
- Cabling up Set B
- Performed frequency sweep on all axes (all looked clean)
- Loaded mSim database: allMapsAdj_070114adj2.xml
- Copied and replaced Set B Theta Targets
Theta Tilt/Focus Testing
- Loaded and ran mSim script: 2014_08_06_ThetaTilt_setB.lst
- Aborted script and manually adjusted neighbors out of the way then re-started the script.
- Aborted script again after 1st target. Only pId 5,6,8 are converging. pId 1,2 are not expected to perform well (flex interference), but the other 4 positioners are not behaving.
--
ChazMorantz - 18 Aug 2014
This topic: Subaru/PFS
> WebHome >
POSitionerEM >
POSEM_AL > 2014_08_18_SetB
Topic revision: r1 - 2014-08-18 - ChazMorantz