Set B Tilt/Focus Testing

• Cabling up Set B
• Performed frequency sweep on all axes (all looked clean)
• Loaded mSim database: allMapsAdj_070114adj2.xml
• Copied and replaced Set B Theta Targets

Theta Tilt/Focus Testing

• Loaded and ran mSim script: 2014_08_06_ThetaTilt_setB.lst
• Aborted script and manually adjusted neighbors out of the way then re-started the script.
• Aborted script again after 1st target. Only pId 5,6,8 are converging. pId 1,2 are not expected to perform well (flex interference), but the other 4 positioners are not behaving.

-- ChazMorantz - 18 Aug 2014