---++ Set C Focus Testing * Generated targets for set C using '071714_setC_merged.xml' * Copied Theta targets to: D:\PfsTests\Targets and deleted target files that were already there (Set B phi targets) * Made mSim scripts for theta and phi testing * pid7 was not included (non-functional...broken flex print bond) * Re-cabled set C * when de-mating S/N 109 (set B pid2) the phi flex print was severely bent adjacent to the connector termination end. Need to verify later if broken. ---+++ Theta Focus Testing * Loaded 070914_set3_allmaps_adj4.xml into mSim after the first target using 071714_setC_merged.xml did not work very well. * Re-started the theta focus testing using '2014_08_12_ThetaTilt_setC_no7.lst' * Finished theta focus testing ---+++ Phi Focus Testing * Moved phi targets into msim folder. re-started msim. * Started to run phi focus testing using '2014_08_12_PhiTilt_setC_no7.lst' * made it to target #2 (still need to take video) -- Main.ChazMorantz - 12 Aug 2014
This topic: Subaru/PFS
>
WebHome
>
POSitionerEM
>
POSEM_AL
>
2014_08_12_SetD
Topic revision: r3 - 2014-08-13 - ChazMorantz
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki?
Send feedback