Set C Focus Testing
- Generated targets for set C using '071714_setC_merged.xml'
- Copied Theta targets to: D:\PfsTests\Targets and deleted target files that were already there (Set B phi targets)
- Made mSim scripts for theta and phi testing
- pid7 was not included (non-functional...broken flex print bond)
- Re-cabled set C
- when de-mating S/N 109 (set B pid2) the phi flex print was severely bent adjacent to the connector termination end. Need to verify later if broken.
Theta Focus Testing
- Loaded 070914_set3_allmaps_adj4.xml into mSim after the first target using 071714_setC_merged.xml did not work very well.
- Re-started the theta focus testing using '2014_08_12_ThetaTilt_setC_no7.lst'
- Finished theta focus testing
Phi Focus Testing
- Moved phi targets into msim folder. re-started msim.
- Started to run phi focus testing using '2014_08_12_PhiTilt_setC_no7.lst'
- made it to target #2 (still need to take video)
--
ChazMorantz - 12 Aug 2014
This topic: Subaru/PFS
> WebHome >
POSitionerEM >
POSEM_AL > 2014_08_12_SetD
Topic revision: r3 - 2014-08-13 - ChazMorantz