Motor Map Generation

• Had difficulty producing motor maps from run over the previous night. pid5 was not moving.
• Realized that neighbor (from set D) was not moved to its home position so it was interfering with pid5 motion.
  • Manually moved all of the set D positioners to their home position

Theta Tilt Testing

• With neighbors out of the way, attempting to converge to Theta Tilt testing targets.
  • used motor map 'allMapsAdj_070114adj2.xml'
• Got to target #10 before end of day. Peter manually moved pid1 into place, but those should be discarded from results (no centroid knowledge, moving theta to compensate for phi error (or vice versa) is not useful).

-- ChazMorantz - 07 Aug 2014