---++Switching to Set B * Re-cabled to Set B * Connected to motors with NST pathway software to verify functionality and performed frequency sweep on all motors (good sweeps for every one). * Loaded allMapsAdj_070114adj2.xml database into mSim (last xml used by Set B). * Made new mSim script to capture that pid5 and pid6 are inverted on stage 1 * Started tilt script (4:36pm) * Aborted at first target convergence. Many of the positioners are struggling to converge. * Made motor map script (2014_08_06_msimMotMap.lst) and ran overnight (using allMapsAdj_070114adj2.xml database) -- Main.ChazMorantz - 06 Aug 2014
This topic: Subaru/PFS
>
WebHome
>
POSitionerEM
>
POSEM_AL
>
2014_08_06_SetD
Topic revision: r1 - 2014-08-06 - ChazMorantz
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki?
Send feedback