ZTF Pressure Gauge
Pfieffer Documentation
Configuration Instructions
The following configuration file should be copied to a USB memory stick:
- SETUP02.CSV: setup file to configure TPG361 on ZTF/P48 network (IP 192.168.1.27)
The configure the pressure gauge controller with this file using the following procedure:
- Power off controller
- Insert memory stick
- Power on controller
- Select set up
- Restore set up
- Select #2
- Power off controller
- Unplug memory stick
- Start recording pressure by holding down the up arrow, or use the tpg.py script.
--
DavidHale - 03 Nov 2017
This topic: Palomar/ZTF
> PressureGauge
Topic revision: r1 - 2017-11-03 - DavidHale