NGAO NIR TTS Cryostat Pre-Ship Review Working Area

Documentation Preparation Lists and Schedules

• NIRTTS PSR Preparation Schedule (pdf)
• NIRTTS PSR Preparation Schedule v2 (pdf) (4/9/13)
• 130801_ZTF_PSR_Documentation_Schedule.JPG (8/1/13)
  

KAON 971 - Pre-ship Report Latest Drafts - for further editing, start with latest version here and track changes

• KAON971_NIRTTS_PreShipReview_v0_1.docx: Outline version (please scan for coming assignments)
• KAON971_NIRTTS_PreShipReview_v0.2.docx: 7/31/13 - Initial consolidation of earlier individual documents

Individual contribution KAON 971 drafts (link your posted versions here for Rich - do not use these as starting points)

Note: Any version of documentation containing potentially ITAR-restricted performance data should not be posted to TWiki. Please use secure control methods to share these data with US persons only.

• NIRTTS Pre-Ship Review Report, DH version 0.23: updated 8/15/2013 12:17 PM

New PSR Documents

• Packing and Shipping Plan
• KAON 970 NIRTTS Camera Assembly and Alignment Procedures (3/26/13)
• Pre-Ship Review Report
• Hardware Components and Spec Sheets
• Pre-Ship Review Presentation

Notes and Q&A

• Should the noise vs. rate curves from KAON 894 be copied forwarded into KAON 971, or just referenced therein? (4/9/13)
  • Final detector noise data should be included in KAON 971. KAON 971 is intended to be a pretty complete snapshot of the system performance upon delivery from Pasadena. (7/28/13, RD)

• Mathcad_-_Shipping_analysis_for_TRICK.pdf: Shipping analysis

• Woking_document_for_assembly_procedure.docx: Assembly procedure. Still needs updating

• Servicing_the_Filter_Wheel_Rev_1.docx: Servicing the Filter Wheel Rev 1 (working document)

• 1362-TM5183_INSTALLATION_ASSEMBLY-section_view.EASM: Section View of entire model

• 1362-TM5183_INSTALLATION_ASSEMBLY.EASM: CAD Model of installation assembly

• Woking_document_for_assembly_procedure.docx: Updated version of assembly procedure. 100% complete. needs to be revised

• Keck_Adaptive_Optics_Note_XXX_cryo_cooler_assembly.docx: Procedure complete. Needs to be revised.