---+!! %MAKETEXT{"FCS Test Data" args="<nop>%WEB%"}% * Shortkey FCS Commands from the _mosdev>_ prompt | *Command* | *Description* | | run_mfcs | runs the FCS server. | | fcs_online | puts the FCS controller into _online_ mode. Or use the _modify -s mfcs online=1_. | | fcspos | shows the positions in microns of the three actuators. | | fcsvolt | show the voltages of the three actuators. | | f1 xx.xx | move actuator 1 to xx.xx microns. | | f2 xx.xx | move actuator 2 to xx.xx microns. | | f3 xx.xx | move actuator 3 to xx.xx microns. | | stop_mfcs | shutdown the FCS server. |
This topic: Keck/MOSFIRE
>
WebHome
>
FCSTestData
Topic revision: r1 - 2009-09-01 - JasonFucik
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki?
Send feedback